 |
Owing to our rich industry experience, we indulge in manufacturing and supplying an outstanding Car Washing Lift. Designed and manufactured in compliance with international standards, this very product is a delight for clients.
Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.
| Model | A.T.L. 4 |
| Plunger dia | 270 mm |
| Capacity | 4 Tons (4000 kg) |
| Maximum lifting height | 1500 mm |
| Operating pressure | 8-10 kg/cm2 |
| Oil fitting capacity | 150 l |
| Overall frame length | 4500 mm |
| Overall frame width | 700 mm |
Two wheeler washing lift provides smart way to wash two-wheelers. This system is designed to wash four vehicles at a time resulting in saving of time and water. This installation will support both indoor & outdoor operation.
Model : ATWL - 2W
| Lifting Capacity | 1200 Kgs. |
| No. of Plunger | 1 No. |
| Plunger Diameter | 165 mm |
| Max. Lifting Height | 1450 mm. |
| Operating pressure | 7 Kg/cm2. |
Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.
| Model | A.T.U. 4 |
| Plunger dia | 270 mm |
| Capacity | 4 Tons (4000 kg) |
| Maximum lifting height | 1500 mm |
| Operating pressure | 8-10 kg/cm2 |
| Oil fitting capacity | 150 l |
| Overall frame length | 4500 mm |
| Overall frame width | 700 mm |
We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.
| Overall Length | ||||||||
| S.No | Model | Capacity in Tons | Ramp Width(mm) | Oil Filling (litres) | Operating Pressure Kg/Cm² | Lifting Height(mm) | Front | Rear |
| 1 | ATU 4 | 4 | 700 | 180-190 | 8-12 | 1500 | 4500 | |
| 2 | 2 ATU 8 | 8 | 700 | 360-380 | 8-12 | 1500 | 4500 | 1500 |
| 3 | ATU 8 | 8 | 820 | 300 | 12 | 1525 | 1525 | |
We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.
| Overall Length | ||||||||
| S.No | Model | Capacity in Tons | Ramp Width(mm) | Oil Filling (litres) | Operating Pressure Kg/Cm² | Lifting Height(mm) | Front | Rear |
| 1 | ATU 4 | 4 | 700 | 180-190 | 8-12 | 1500 | 4500 | |
| 2 | 2 ATU 8 | 8 | 700 | 360-380 | 8-12 | 1500 | 4500 | 1500 |
| 3 | ATU 8 | 8 | 820 | 300 | 12 | 1525 | 1525 | |
We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.
| Overall Length | ||||||||
| S.No | Model | Capacity in Tons | Ramp Width(mm) | Oil Filling (litres) | Operating Pressure Kg/Cm² | Lifting Height(mm) | Front | Rear |
| 1 | ATU 4 | 4 | 700 | 180-190 | 8-12 | 1500 | 4500 | |
| 2 | 2 ATU 8 | 8 | 700 | 360-380 | 8-12 | 1500 | 4500 | 1500 |
| 3 | ATU 8 | 8 | 820 | 300 | 12 | 1525 | 1525 | |
We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.
| Overall Length | ||||||||
| S.No | Model | Capacity in Tons | Ramp Width(mm) | Oil Filling (litres) | Operating Pressure Kg/Cm² | Lifting Height(mm) | Front | Rear |
| 1 | ATU 4 | 4 | 700 | 180-190 | 8-12 | 1500 | 4500 | |
| 2 | 2 ATU 8 | 8 | 700 | 360-380 | 8-12 | 1500 | 4500 | 1500 |
| 3 | ATU 8 | 8 | 820 | 300 | 12 | 1525 | 1525 | |
Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.
| Model | A.T.L. 4 |
| Plunger dia | 270 mm |
| Capacity | 4 Tons (4000 kg) |
| Maximum lifting height | 1500 mm |
| Operating pressure | 8-10 kg/cm2 |
| Oil fitting capacity | 150 l |
| Overall frame length | 4500 mm |
| Overall frame width | 700 mm |
Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.
| Model | A.T.L. 4 |
| Plunger dia | 270 mm |
| Capacity | 4 Tons (4000 kg) |
| Maximum lifting height | 1500 mm |
| Operating pressure | 8-10 kg/cm2 |
| Oil fitting capacity | 150 l |
| Overall frame length | 4500 mm |
| Overall frame width | 700 mm |