Hydraulic Lift

Owing to our rich industry experience, we indulge in manufacturing and supplying an outstanding Car Washing Lift. Designed and manufactured in compliance with international standards, this very product is a delight for clients.

Highlights:

  • Plungers are of high grade steel manufactured to close tolerance with hard chrome plating for high wear resistance and good finish
  • Outer cylinder coated with Fiber Reinforced Plastic protecting it against corrosion (optional)
  • Uniquely designed wiper rings prevent entry of water and dust into the Hoist cylinder
  • Gland rings used in the plungers are designed for enhanced performance
  • Heavy duty rigid ramps accommodate a wide range of vehicles of varying size and type

Specifications:

  • Capacity (Tons) : 4
  • No. of Posts : 1
  • Plunger Diameter (M) : 270
  • Operating Pressure (Kg/cm2) : 9 to 12
  • Lifting Height (mm) : 1500
  • Ramp Length front (mm) : 3636
  • Ramp Width (mm) : 700
  • Oil fill Capacity (Ltrs) : 150

Washing Lift Tyre Rest Platform

Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.

Specifications:
Model A.T.L. 4
Plunger dia 270 mm
Capacity 4 Tons (4000 kg)
Maximum lifting height 1500 mm
Operating pressure 8-10 kg/cm2
Oil fitting capacity 150 l
Overall frame length 4500 mm
Overall frame width 700 mm

Two Wheeler Washing Hoist

Two wheeler washing lift provides smart way to wash two-wheelers. This system is designed to wash four vehicles at a time resulting in saving of time and water. This installation will support both indoor & outdoor operation.
Model : ATWL - 2W

Applications:

  • Washing of two wheelers (4 vehicles at a time)

Features:

  • Support both indoor & outdoor installation
  • Lifting and washing of four vehicles at a time
  • Easy access of all parts of the vehicle
  • Reduce operation time & Improves productivity
  • Enable efficient utilization of water resources
  • Uniquely designed wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering.
  • Gland rings used in the plungers to increase performance
  • High-grade steel plungers manufactured to close tolerance with hard chrome plating for high wear-resistance.
Specifications:
Lifting Capacity 1200 Kgs.
No. of Plunger 1 No.
Plunger Diameter 165 mm
Max. Lifting Height 1450 mm.
Operating pressure 7 Kg/cm2.

Automotive Jacks

Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.

Technical Specifications:
Model A.T.U. 4
Plunger dia 270 mm
Capacity 4 Tons (4000 kg)
Maximum lifting height 1500 mm
Operating pressure 8-10 kg/cm2
Oil fitting capacity 150 l
Overall frame length 4500 mm
Overall frame width 700 mm

Hydraulic Servicing Jack

We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.

Features:

  • High durability
  • High retention power
  • Temperature resistant
  • Easy installation
  • Great Output
Specifications:
              Overall Length
S.No Model Capacity in Tons Ramp Width(mm) Oil Filling (litres) Operating Pressure Kg/Cm² Lifting Height(mm) Front  Rear
1 ATU 4 4 700 180-190 8-12 1500 4500  
2 2 ATU 8 8 700 360-380 8-12 1500 4500 1500
3 ATU 8 8 820 300 12 1525 1525  

Hydraulic Washing Lift

We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.

Features:

  • High durability
  • High retention power
  • Temperature resistant
  • Easy installation
  • Great Output
Specifications:
              Overall Length
S.No Model Capacity in Tons Ramp Width(mm) Oil Filling (litres) Operating Pressure Kg/Cm² Lifting Height(mm) Front Rear
1 ATU 4 4 700 180-190 8-12 1500 4500  
2 2 ATU 8 8 700 360-380 8-12 1500 4500 1500
3 ATU 8 8 820 300 12 1525 1525  

Hydraulic Jacks

We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.

Features:

  • High durability
  • High retention power
  • Temperature resistant
  • Easy installation
  • Great Output
Specifications:
              Overall Length
S.No Model Capacity in Tons Ramp Width(mm) Oil Filling (litres) Operating Pressure Kg/Cm² Lifting Height(mm) Front Rear
1 ATU 4 4 700 180-190 8-12 1500 4500  
2 2 ATU 8 8 700 360-380 8-12 1500 4500 1500
3 ATU 8 8 820 300 12 1525 1525  

Vehicle Lift

We are engaged in manufacturing and supplying Hydraulic Servicing Jack. Hydraulic Servicing Jack has the capacity to handle all types of vehicles including Cars, Jeeps, Vans, LCVs and Heavy Trucks and Buses. The products we offer are manufactured using quality tested raw material under the guidance of our reliable engineers. Hoists can be custom built to suit consumer. Plungers are made of high grade steel, ground to close tolerance and hard chrome plated for high wear resistance and excellent surface finish.

Features:

  • High durability
  • High retention power
  • Temperature resistant
  • Easy installation
  • Great Output
Specifications:
              Overall Length
S.No Model Capacity in Tons Ramp Width(mm) Oil Filling (litres) Operating Pressure Kg/Cm² Lifting Height(mm) Front Rear
1 ATU 4 4 700 180-190 8-12 1500 4500  
2 2 ATU 8 8 700 360-380 8-12 1500 4500 1500
3 ATU 8 8 820 300 12 1525 1525  

Tyre Rest Platform Lift - Hydraulic - 4 Ton

Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.

Technical Specifications:
Model A.T.L. 4
Plunger dia 270 mm
Capacity 4 Tons (4000 kg)
Maximum lifting height 1500 mm
Operating pressure 8-10 kg/cm2
Oil fitting capacity 150 l
Overall frame length 4500 mm
Overall frame width 700 mm

ATL 4 - Tyre Platform lift

Our company designs and manufactures superior quality Hydraulic Lifts, which are robust and light in weight. The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift's high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.

Technical Specifications:
Model A.T.L. 4
Plunger dia 270 mm
Capacity 4 Tons (4000 kg)
Maximum lifting height 1500 mm
Operating pressure 8-10 kg/cm2
Oil fitting capacity 150 l
Overall frame length 4500 mm
Overall frame width 700 mm